Браузер не даёт сохранять данные (например, приватный режим): закладки пропадут после закрытия вкладки.
Поиск статей PubMed
Ключевые слова, автор, журнал, годы — результаты из PubMed, аннотации с переводом на русский, закладки в браузере.
Найдено: 26 252
Страница 979 из 1000-
Efficient Separation of Single-Stranded DNA of Various Lengths for Applications in Bioimaging, Gene Editing, and Nanostructures.
Single-stranded DNA (ssDNA) has extremely high design flexibility and specific functions. Therefore, ssDNA is used in crucial practical applications in many fields, such as molecular detection, gene editing, and nanotechnology. However, the existing methods for ssDNA preparation often present limitations in terms of yield, purity, and length applicability. In order to overcome these challenges, the present study proposes a ssDNA separation method that utilizes the modification of linear polyacrylamide (LPA) combined with denaturing agarose gel electrophoresis (DAGE). The method is referred to as LPA-DAGE. The underlying principle is to produce LPA-modified double-stranded DNA (dsDNA) through PCR using the LPA primer and then achieve efficient ssDNA separation using denaturing agarose gel electrophoresis based on molecular weight differences. This method can stably recover ssDNA showing significant advantages over the existing methods in terms of purity and recovery rate. The results of this study demonstrate that the proposed ssDNA preparation method enables signal amplification using fluorescence in situ hybridization (FISH), CRISPR/Cas9-mediated homologous recombination repair, and nanostructure construction using DNA origami.
-
De Novo Synthesis of Reticuline and Taxifolin Using Re-engineered Homologous Recombination in Yarrowia lipolytica.
Yarrowia lipolytica has been widely engineered as a eukaryotic cell factory to produce various important compounds. However, the difficulty of gene editing and the lack of efficient neutral sites make rewiring of Y. lipolytica metabolism challenging. Herein, a Cas9 system was established to redesign the Y. lipolytica homologous recombination system, which caused a more than 56-fold increase in the HR efficiency. The fusion expression of the hBrex27 sequence in the C-terminus of Cas9 recruited more Rad51 protein, and the engineered Cas9 decreased NHEJ, achieving 85% single-gene positive efficiency and 25% multigene editing efficiency. With this system, neutral sites on different chromosomes were characterized, and a deep learning model was developed for gRNA activity prediction, thus providing the corresponding integration efficiency and expression intensity. Subsequently, the tool and platform strains were validated by applying them for the de novo synthesis of (S)-reticuline and (2S)-taxifolin. The developed platform strains and tools helped transform Y. lipolytica into an easy-to-operate model cell factory, similar to Saccharomyces cerevisiae.
-
An engineered CRISPR-Cas12i tool for efficient multiplexed genome editing.
Developing efficient and simplified tools for multiplexed genome editing remains challenging due to limitations in precursor CRISPR RNA (pre-crRNA) processing and reliance on additional RNA-based regulatory components. Cas12i.3, a small RNA-guided nuclease, reportedly lacks pre-crRNA processing ability, restricting its multiplexing capability. Here, we engineered Cas12i.3 by optimizing CRISPR RNA (crRNA) design, codon usage, and exonuclease fusion, generating initial optimized Cas12i (IOCas12i) system. Further rational design and amino acid mutations yielded the highly efficient enhanced optimized Cas12i (EOCas12i) systems, EOCas12i-Combo1 and EOCas12i-Combo2, exhibiting 2.5- to 22.8-fold and 3.0- to 60.0-fold editing efficiencies relative to wild-type Cas12i.3, comparable to Streptococcus pyogenes Cas9 (SpCas9) and Lachnospiraceae bacterium Cas12a (LbCas12a). Additionally, they exhibited high specificity and produced longer insertions and deletions (indels) that may facilitate gene knockout. Notably, both variants enabled efficient multiplexed editing of up to 30 targets using compact crRNA arrays. These advancements position EOCas12i-Combo1 and EOCas12i-Combo2 as promising platforms for multiplexed genome editing applications.
-
Identification of squalene epoxidase in triterpenes biosynthesis in Poria cocos by molecular docking and CRISPR-Cas9 gene editing.
BACKGROUND: Squalene epoxidase is one of the rate-limiting enzymes in the biosynthetic pathway of membrane sterols and triterpenoids. The enzyme catalyzes the formation of oxidized squalene, which is a common precursor of sterols and triterpenoids. RESULT: In this study, the squalene epoxidase gene (PcSE) was evaluated in Poria cocos. Molecular docking between PcSE and squalene was performed and the active amino acids were identified. The sgRNA were designed based on the active site residues. The effect on triterpene synthesis in P. cocos was consistent with the results from ultra-high-performance liquid chromatography-quadruplex time-of-flight-double mass spectrometry (UHPLC-QTOF-MS/MS) analysis. The results showed that deletion of PcSE inhibited triterpene synthesis. In vivo verification of PcSE function was performed using a PEG-mediated protoplast transformation approach. CONCLUSION: The findings from this study provide a foundation for further studies on heterologous biosynthesis of P. cocos secondary metabolites.
-
CRISPR/Cas system: An emerging technology in stem cell research.
The identification of new and even more precise technologies for modifying and manipulating the genome has been a challenge since the discovery of the DNA double helix. The ability to modify selectively specific genes provides a powerful tool for characterizing gene functions, performing gene therapy, correcting specific genetic mutations, eradicating diseases, engineering cells and organisms to achieve new and different functions and obtaining transgenic animals as models for studying specific diseases. Clustered regularly interspaced short palindromic repeats (CRISPR)/Cas9 technology has recently revolutionized genome engineering. The application of this new technology to stem cell research allows disease models to be developed to explore new therapeutic tools. The possibility of translating new systems of molecular knowledge to clinical research is particularly appealing for addressing degenerative diseases. In this review, we describe several applications of CRISPR/Cas9 to stem cells related to degenerative diseases. In addition, we address the challenges and future perspectives regarding the use of CRISPR/Cas9 as an important technology in the medical sciences.
-
Reversible perturbations of gene regulation after genome editing in Drosophila cells.
The prokaryotic phage defense CRISPR/cas-system has developed into a versatile toolbox for genome engineering and genetic studies in many organisms. While many efforts were spent on analyzing the consequences of off-target effects, only few studies addressed side-effects that occur due to the targeted manipulation of the genome. Here, we show that the CRISPR/cas9-mediated integration of an epitope tag in combination with a selection cassette can trigger an siRNA-mediated, epigenetic genome surveillance pathway in Drosophila melanogaster cells. After homology-directed insertion of the sequence coding for the epitope tag and the selection marker, a moderate level of siRNAs covering the inserted sequence and extending into the targeted locus was detected. This response affected protein levels less than two-fold and it persisted even after single cell cloning. However, removal of the selection cassette abolished the siRNA generation, demonstrating that this response is reversible. Consistently, marker-free genome engineering did not trigger the same surveillance mechanism. These two observations indicate that the selection cassette we employed induces an aberrant transcriptional arrangement and ultimately sets off the siRNA production. There have been prior concerns about undesirable effects induced by selection markers, but fortunately we were able to show that at least one of the epigenetic changes reverts as the marker gene is excised. Although the effects observed were rather weak (less than twofold de-repression upon ago2 or dcr-2 knock-down), we recommend that when selection markers are used during genome editing, a strategy for their subsequent removal should always be included.
-
[Correcting pathogenic mutations using prime editing: an overview].
Gene editing is an ever-evolving field and Prime editing technology is among the latest ones. It makes it possible to modify a gene using a Cas9 nickase that cuts a single strand of DNA. This Cas9 nickase is fused with a reverse transcriptase that copies a single guide RNA synthetized by the researcher. This technique is used on one hand to create pathogenic mutations to obtain cell or animal models with a specific mutation. On the other hand, Prime editing is also used in research to treat hereditary diseases by correcting mutations associated with a pathogenic effect. The mode of delivery of the treatment to the affected cells in living organisms constitutes a main challenge. Different methods are studied to reach the organs specific to each disease. This review article presents the latest results in the field as well as the challenges to solve to optimize the possible uses of Prime editing.
-
Development and Optimization of CRISPR Prime Editing System in Photoautotrophic Cells.
Prime editor (PE), a versatile editor that allows the insertion and deletion of arbitrary sequences, and all 12-point mutations without double-strand breaks (DSB) and a donor template, dramatically enhances research capabilities. PE combines nickase Cas9(H840A) and reverse transcriptase (RT), along with prime editing guide RNA (pegRNA). It has been reported in several plant species, but a weak editing efficiency has led to a decrease in applications. This study reports an optimized-prime editor (O-PE) for endogenous gene editing in Arabidopsis thaliana cells, with an average 1.15% editing efficiency, which is 16.4-fold higher than previously reported. Meanwhile, we observed an increase in indels when testing alternative reverse transcriptase and found out that nCas9(H840A) fused to non-functional reverse transcriptase was responsible for the increase. This work develops an efficient prime editor for plant cells and provides a blueprint for applying PE in other photoautotrophic cells, such as microalgae, that have a high industrial value.
-
A dual-specific CRISPR-Cas nanosystem for precision therapeutic editing of liver disorders.
-
Engineering dispersed mycelium morphology in Aspergillus niger for enhanced mycoprotein production via CRISPR/Cas9-mediated genome editing.
Filamentous fungi are widely utilized in industrial fermentation processes due to their high productivity, with mycelial morphology directly influencing fermentation broth viscosity and target product yield, which is a critical parameter for process optimization. Aspergillus niger, an FDA-approved safe filamentous fungus, typically forms tightly packed mycelial pellets in submerged cultures, which severely restricts its industrial application potential by limiting mass transfer efficiency. To address this challenge, CRISPR/Cas9 mediated genome editing coupled with fermentation optimization enhanced microbial protein production in A. niger. Endogenous α-1,3-glucan synthase genes (agsA, agsB) and galactosaminogalactan (GAG) synthase genes (sph3, uge3) were disrupted using CRISPR/Cas9, achieving complete dispersion of filamentous pellets in liquid media. This morphological engineering strategy resulted in a 77.52 % increase in biomass and 39.98 % enhancement in mycelial protein content compared to the wild-type strain (A. niger Li2). Transcriptomic analysis revealed that the engineered strain (A. niger AnΔABSU) exhibited upregulated transporter proteins (ABC transporters, MFS transporters, sugar transporters), accelerating nutrient uptake and energy metabolism; altered cell wall integrity pathways, including activation of the MAPK signaling cascade and increased sensitivity to cell wall stressors; enhanced amino acid biosynthesis, driven by upregulated gene expression in key metabolic pathways. Furthermore, response surface methodology (RSM) with Box-Behnken design optimized the fermentation medium, yielding 16.67 g/L biomass and 45.91 % protein content, representing 115.37 % and 67.01 % improvements over the unoptimized wild-type control. This study establishes a novel paradigm for constructing high-efficiency microbial protein cell factories via integrated morphological-engineering and fermentation optimization.
PubMed отдаёт не больше 10 000 первых результатов — уточните запрос, чтобы увидеть остальные.